Request a quote on stock# 7129| Specification | Description |
|---|---|
| Swing Over Table, Maximum | 18.9375" 18.9375" 18.9375" |
| Grinding Diameter, Minimum | 0" |
| Grinding Diameter, Maximum | 18" |
| Distance Between Centers, Nominal | 72" |
| Grinding Wheel Diameter, Standard | 14" |
| Grinding Wheel Width, Standard | 2" |
| Grinding Wheel Hole Diameter | 5" |
| Table Swivel Taper Forward | 3" TPF |
| Table Swivel Taper Back | 1" TPF |
| Table Swivel Angle Forward | 7-DEGREES |
| Table Swivel Angle Back | 2-DEGREES |
| Headstock Swivel Forward | 90-DEGREES |
| Headstock Swivel Back | 30-DEGREES |
| Workhead and Tailstock Center Tapers | #10 B&S |
| Workhead Spindle Speeds, Range | 25 to 225 RPM |
| Table Longitudinal Feeds, Infinite | 3 to 240 IPM |
| Automatic In-Feed at Table Reversal | .0004 to .014 IPR Grinding Whe |
| Grinding Attachment, HP/RPM | 2 HP/3450 RPM Hydraulic Motor |
| Horsepower/RPM | 1.5 HP/1165 RPM |
| Floor Space Required | 19'9" x 5'9" |
| Weight, Approximately | 13000 LBS |
ASI Machine Tool
315 Shorland Drive
Richwood, KY 41094
859-485-8370
859-485-8374
sales@asimachinetool.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers