Femco BMC-110R3 CNC Horizontal Boring & Milling Machine
Stock Number: 8072
Femco BMC-110R3
Age: 2009
Condition: Excellent
118 x 70 x 66
Click to view larger photo
Request a quote on stock# 8072
Equipped With:
All major components are fully ribbed close grain Meehanite castings completely stressed relieved before machining. The vertical column walls are thick and cross ribbed, the front vertical way is massive and is offset 3 ½" from the back way to absorb any radial thrust generated during heavy machining operations and to guarantee accuracy, rigidity and longevity.
Box Ways are induction hardened to 55-60 C.X.100 deep and are precision ground. Headstock, column base, and cross slides are lined with turcite (A LOW FRICTION MATERIAL). Turcite provides excellent wear and slip stick characteristics due to its low coefficient of friction. It also provides good vibration damping. Turcite reacts with the machine structure thus giving a high static and dynamic stiffness to the machine.
Lubrication to all axis is done automatically to ensure longevity of the ways.
Large 2 inch Diameter, High Precision Ball Screws are pre-loaded with the nut when installed. This ensures zero-backlash and smooth motion through the machining process.
The Spindle is made from chromium molybdenum steel alloy. The spindle and the sleeve surfaces are hardened in a nitrating process, then ground and lapped, thus, insuring high rigidity for a smooth surface and long life. Class 7 bearings are used in all our spindles.
The Table is clamped by six (6) hydraulic clamps at 315-320 KG/CM-2 clamping force. Hydraulic shot pins provide location every 90 degrees, which is programmable. Angles between 0 and 360 degrees can be positioned manually. Optional B axis with Dual Worm Servo Drive has contouring capabilities.
Precision Glass Scales are installed on X-Y-Z axes insuring accuracy and repeatability in your environment. These scales are independent of the drive system.
SPECIFICATIONS:
Travel:
Table Cross Travel (X-Axis) 118.11"
Headstock Travel (Y-Axis) 70.87"
Table Longitudinal Travel (Z-Axis) 66.93"
Table:
Table Size 56.69" x 66.93"
Table Load 13,889 Lbs
Spindle:
Diameter 4.33"
Stroke (W-Axis) 21.65"
Taper ISO #50 with Power Operated Drawbar
Tool Shank CT50
Milling Spindle Diameter 8.86"
Pull Stud (Option MAS-I) MAS-II 60 deg
Motor (Continuous/30 min Rated) AC 22/26kw 29/35h.p.
Speed Ranger-Low Stepless 5-626 RPM
Speed Ranger-High Stepless 626 to 2,500 RPM
Automatic tool changer (opt.)
Tool Storage Capacity 60, 90 Optional
Max. Tool Diameter (Adjacent Pods Full) 4.72"
Max. Tool Diameter (Adjacent Pods Empty) 9.84"
Max. Tool Length 15.75"
Max. Tool Weight 55 Lbs
Tool to Tool Exchanging Time 15 sec
Tool Selection Method: Automatic Selection of the Shortest Route
Positioning Servo Motor:
X-Axis 9.4 hp
Y-Axis 9.4 hp
Z-Axis 9.4 hp
W-Axis 5.4 hp
Rotary table 5.1 hp
Feed Rate in all Axes 0.2 - 78.7" /min (stepless)
Control:
Positioning Accuracy X, Y, Z, and W-Axis 0.025/300mm (0.001"/11.81") Repeatability X, Y, Z, and W-Axis ±0.01mm (±0.0004")
Control Axes 5
W-Axis 4
Rapid Traverse Rate:
X-, Y-, Z-Axis 394 IPM
W-Axis 157 IPM
Rapid Rotation of Rotary Table 0.95 RPM
Machine Dimensions and Net Weight:
Height (Standard) 1147"
Floor Space 308" x 283"
Net Weight 46,297 Lbs
Power Requirement: 220 Volts 3 Phase 60 Cycle, 200 Amps,
440 Volt Transformer on Request.
FANUC 21i CONTROL SYSTEMS:
Controlled 5 Axes Simultaneous Controllable 4 Axes
Reference Point Return (G27, G28) Linear Interpolation
Circular Interpolation 8.4" CRT/MDI (Small Type) / (Full Key)
Registered Programs 63 Part Program Stored Length 80m
Sequence Number Search Program Number Search
Manual Pulse Generator External Work Number Search
Program Protect Inch/Metric Switching
Machine Lock Backlash Compensation
Program Protect Signal Self-Diagnosis Function
Read/Puncher Interface Direct Input of Meas Work Coordinate Sys Shift
EIA/ISO Automatic Recognition Mirror Image
Actual Speed Display Cutter Compensation
Canned Cycle for Hole Machining Tool Compensation Memory 32 sets
Option Functions:
Tape Storage L 120m, 320m Expand to 512m Handle Interruption
Playback Coordinate Rotation
Scaling Tool Offset - Addition 64, 99
Program Input of Offset Amount (G10) Tool Life Management
Pattern Data Input Graphic Conversational Programming
Menu Programming Tool Compensation Memory B
Custom Macro Background Editing
Graphic Display German/French Display
Chinese Display Addition of Registered Programs to 125
Fanuc Card Floppy Cassette
Fanuc PPR Color LCD
Expanded Part Program Editing Run Hour/Parts Number Display
Directory Display of Floppy Cassette Polar Coordinate Command
Clock Function
STANDARD ACCESSORIES:
X-, Y-, Z-Axes Linear Scales Rotary Table every 90 Degree Precision Indexing
Saddle Slideway Cover Table Slideway Cover
Working Light X-, Y-, Z-Axes Ball Screw Cover
Anchors and Levels for Installation Headstock Cooling System
Operator's Manual.
ASI Machine Tool
315 Shorland Drive
Richwood, KY 41094
859-485-8370
859-485-8374
sales@asimachinetool.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
