Hitachi Seiki HS-630 Horizontal Machining Center
Stock Number: 7579
Hitachi Seiki HS-630
Age: 2000
Condition: Excellent
32 x 31 x 31
Click to view larger photo
Request a quote on stock# 7579
| Specification | Description |
|---|
| GENERAL MACHINE SPECIFICATIONS | |
| X Axis Travel | 32.3" |
| Y Axis Travel | 31.5" |
| Z Axis Travel | 31.5" |
| Table Center to Spindle Nose | 5.9" to 37.4" |
| Table Surface to Spindle Nose | 3.9" to 35.4" |
| Expandable ATC Magazine | 40 Tools |
| UTS Probe System | Basic Function Level |
| Main Spindle Motor | 30 HP |
| Spindle Range | 120 - 12,000 RPM |
| Tool Size | 4.9" Dia by 19.7" Long |
| Tool Weight | 44 Lbs |
| Max. Weight on Pallet | 2640 Lbs |
| Rapid Traverse | 1,772 IPM All Axes |
| | |
Equipped With:
EQUIPPED WITH
Sigma/Fanuc 16iM CNC Control w/ 10.4" TFT Color Display Panel
264 Ft. of Memory & Fanuc Servo Motors & Drives
Positioning Accuracy
Repeatability +.00008" All Axes Full Stroke
1 Degree Bi-Directional Pallet Indexing is Standard
99 Tool Length or Diameter Offsets & 6 Work Offsets
Direct Tapping Function
Manual Portable Pulse Generator
Spindle Speed Over-Ride to 200% of Programmed Speeds
Feedrate Over-Ride to 200% of Programmed Feeds Lock out to 120%
Helical Interpolation - Thread Milling (3 Axis Control)
Auto Power Cut-Off Device - Shuts Machine Off at the End of Program
Maximum Work Area 36.6" x 41.3 Height
Seiki ATAC-10 Thermal Compensation for Y & Z Axes
40 Tool Magazine with #40 Taper
Direct Tapping Cutting Monitor
Tool Life Management
Spare Tool
Jet Coolant System
Over Flood System w/Auxiliary pump
Coolant thru Spindle - 220 PSI Filtration
Chip Conveyor w/Rolling Filter System
High rigidity bed incorporates the use of a special casting technology eliminating most cored hoes, which therefore provides up to 200% more rigidity than conventional methods.
High Speed Machining demands efficient chip disposal, therefore the column traverse becomes the "X" axis to provide for better chip disposal between the column and the table.
The A.P.C. requires only movement of the "Y" axis that allows pallet changes to operate free of any interference with both the "Z" and "Y" axes movements.
The A.T.C. mechanism is structurally aligned to the "X" axis (column) and movement of the "Y" axis (spindle) is encapsulated within the column itself. This design feature provides the trouble-free, high-speed tool changes required for High Speed Machining.
High speed rapid traverse rates of 45m/min. (1,772 I.P.M.) dramatically reduces non-cutting times. These superior rapid traverse rates are made possible by using a feed mechanism that employs a 50mm (2.0") diameter, dual lead ballscrew that is pretensioned and double anchored. This highly rigid design allows the high speed rapid traverse, yet minimized thermal distortion and inertia induced flex during acceleration and deceleration of the axes.
Universal Touch Sensor Probing (U.T.S.) is standard. This highly flexible sensor allows easy workpiece measuring, tool length measuring, cast surface detection, or reference coordinate positioning from a hole or boss. Optional memory &
software upgrades allow the sensor system to function as a full featured CNC Probing System Software for CMM Type Measurements.
High Speed Machining demands a High Performance Spindle Drive. The HS-630 is equipped with an Integral, 30 H.P. AC spindle drive motor which also includes a spindle chiller. This combination of features allows virtually spindle speeds of 100 to 10,000 R.P.M., provides full H.P. at 465 R.P.M. and offers 50.0 kgf*m of torque.
The ATC Magazine/Change Arm Mechanism is designed to minimize the time it takes to stage the next machining tool as well as providing expanded magazine capacity. The ATC Arm is operated by a high-speed cam driven mechanism which ensures high-speed performance and maximum reliability. The magazine chain speed has been increased to 26m/min. (1024"/min.) to shorten the "next tool" call time. The ATC magazine is expandable from it's standard configuration of 40 tools to 60 or 90 tools in the field. Up to 360 tools are available using the optional matrix configuration magazine.
A High-Speed Rotary Type APC including Two (25") pallets is standard. Load Station may be rotated 360 degrees for easy loading, cleaning or set-up. To ensure operator safety during A.P.C. operation. The APC is fully enclosed A.P.C. at the load station and interlocked so that the APC cannot cycle when the loading station doors are open.
The Hitachi Seiki Sigma Control is configured to allow high-speed feed rate capability of up to 787"/min.
High Volume Coolant System includes Flood Coolant Pump, Jet Wash Pump, and a 225 Gallon Capacity Coolant Tank.
Thermal distortion of the entire machine is controlled within +/- 10 Microns by the built-in ATAC10 Thermal Control System, which is supplied as standard equipment.
ASI Machine Tool
315 Shorland Drive
Richwood, KY 41094
859-485-8370
859-485-8374
sales@asimachinetool.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
