Toolmex TUR-630A MN/3000 CNC Lathe
Stock Number: 8326
Toolmex TUR-630A MN/3000
Age: 2000
Condition: Very Good
5.5 / 14 x
Click to view larger photo
Request a quote on stock# 8326
| Specification | Description |
|---|
| SPECIFICATIONS | |
| Chuck Size | 18" |
| Swing Over bed Ways | 25" |
| Swing Over Cross Slide | 15" |
| Distance Between Centers | 118" |
| Spindle Speed Ranges (2) | 1 - 500 and 2 - 1850 |
| Bore | 5.51" |
| Nose | Camlock D1-11 |
| Main Motor | 25 HP |
| Max. Torque at the Spindle | 2800 NW |
| Front Bearing | 10" |
| X Axis Travel | 14" |
| Stroke of Quill | 6" |
| Quill Diameter | 3.5" |
| Quill Taper | MT5 |
| Rapid Traverse | 393.7 IPM |
| Programmable Feed Rate | 0.19 - 125.9 IPM |
| Cross Feed Torque | 2,248 Lbs-Force |
| Longitudinal Feed Torque | 3,372 Lbs - Force |
| Floor Space | 185" x 88" |
| Weight | 12,320 Lbs |
| Bed Width | 17" |
Equipped With:
EQUIPPED WITH
Siemens-Sinumerik 810D Control
Aloris tool post
Constant cutting speed
Double Vee guiding carriage on the bed ways
Three point spindle support
Double chuck adaptor
Complete coolant system
Automatic lubrication system
Chip tray
Full length rear splash guard
Moving front splash guard
Halogen work light
Dead center
Operating and programming manuals
12" 3-Jaw Chuck
Large steady rest and Small steady rest included
Chuck adapter on the end of the headstock for supporting long work
Comments:
Year of Manufacture 2000
Very low hours
Run in single shift shop for the past (2) years and prior to this the machine was only used infrequently to run one job.
Photo shows a brand new 18” chuck which the owner would prefer to keep -
Other chucks are available.
Chuck adapter has the same pass through diameter as the spindle
This machine is in exceptionally good running condition and has no issues whatsoever
The machine is currently running a job that will be completed in mid-October.
ASI Machine Tool
315 Shorland Drive
Richwood, KY 41094
859-485-8370
859-485-8374
sales@asimachinetool.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
