Daewoo Slant Bed CNC Turning Center Puma 300C
Stock Number: 8420
Daewoo Puma 300C
Serial No. PM250751 Age: 1999
Condition: Excellent
11 x 26
Click to view larger photo
Request a quote on stock# 8420
| Specification | Description |
|---|
| SPECIFICATION | |
| Swing Over Bed | 23" |
| Swing Over Carriage | 14.57" |
| Max. Turning Diameter | 15.75" |
| Max. Turning Length | 25.6" |
| Distance Between Centers | 36" |
| X Axis Travel | 11.1" |
| Z Axis Travel | 26.77" |
| Spindle Speed Range | 28 - 2,800 RPM |
| Spindle Nose | A2-11 |
| Number of ools on Turret | 10 |
| Draw Tube Inside Diameter | 4.05" |
| Spindle Bore | 4" |
| X Axis Feed Rate | 800 IPM |
| Z Axis Feed Rate | 945 IPM |
| Tailstock Quill Diameter | 3.94" |
| Tailstock Spindle Taper | MT#5 |
| Tailstock Stroke, Programmable | 3.94" |
| Approx. Weight | 13,400 Lbs |
| Approx. Dimensions | 133" x 72" x 72" |
Equipped With:
EQUIPPED WITH
Solid box way construction
Induction hardened and precision ground rectangular type guideways
#18-TC FANUC CNC two-axis CNC control with CRT and RS232C port
12" Diameter KITAGAWA three-jaw hydraulic chuck
Ten station turret with (10) toolholders
Programmable tailstock body
Automatic tool setter (Q-Setter)
TURBO combination chip conveyor and coolant system with pump and tank
Automatic forced lubrication system to all guideways, ball screws, and the tailstock quill
35 H.P. AC hi-torque digital spindle drive motor
Machine is wired for 3/60/220 volt operation
New set of Spindle Bearings Installed
ASI Machine Tool
315 Shorland Drive
Richwood, KY 41094
859-485-8370
859-485-8374
sales@asimachinetool.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
