Used 2010 Mazak Integrex 300IVS ST CNC Lathe

SPECIFICATIONS: MAXIMUM SWING 33.5″ MAXIMUM SWING USING Y-AXIS 26″-33.5″ MAXIMUM SWING OVER CROSS SLIDE 33.5″ MAXIMUM SWING OVER LOWER TURRET 16.5″ NOTE: WITHOUT BORING BAR HOLDER ON TURRET. MAXIMUM CUTTING DIAMETER: CHUCKING 30″ (UPPER) MAXIMUM CUTTING DIAMETER: CHUCKING 16.5″ (LOWER) MAXIMUM CUTTING LENGTH 60″ MAXIMUM DISTANCE BETWEEN CHUCK FACES 60″ MAIN SPINDLE SPECIFICATIONS (L): SPINDLE NOSE A2-8 SPINDLE BORE 3.46″ MAXIMUM BAR WORK 3.0″ DIA. SPINDLE SPEED 4,000 RPM SPINDLE INDEX (PROGRAMMABLE) 0.0001 DEG. SPINDLE HORSEPOWER (CONT./30 MINS.) 30/40 HP (AC) SPINDLE TORQUE 534 FT-LBS. SECOND SPINDLE SPECIFICATIONS (R) SPINDLE NOSE A2-8 SPINDLE BORE 3.46″ SPINDLE SPEED 4,000 RPM SPINDLE INDEX (PROGRAMMABLE) (0.0001 DEG. C-AXIS OPTIONAL) SPINDLE HORSEPOWER (CONT./30 MIN.) 30/35 HP (AC) SPINDLE TORQUE 368.8 FT-LBS. UPPER TURRET AND TOOLING SPECIFICATIONS: TYPE OF TURRET 1 POSITION W/ATC TOOL SHANK HEIGHT 1.0″ TOOL SIZE (BORING BAR MAX. DIA.) 1.5″ MAGAZINE CAPACITY 40 TOOLS TOOL SELECTION METHOD RANDOM TOOL TO TOOL ATC TIME 1.3 SEC. MAX. TOOL DIA. W/ALL POCKETS FULL 3.54″ MAX. TOOL DIA. W/ADJACENT POCKETS EMPTY 4.92″ MAX. TOOL LENGTH (FROM GAGE-LINE) 15.75″ MAXIMUM TOOL WEIGHT 22 LBS. ATC TOOL SHANK MAZAK KM63 ROTARY TOOL SPINDLE SPEED 12,000 RPM ROTARY TOOL SPINDLE HORSEPOWER (20%ED) 25 HP (AC) ROTARY TOOL TORQUE (20%ED) 88.5 FT-LBS. MAXIMUM FACE MILL 4″ MAXIMUM END MILL 1.25″ MAXIMUM DRILL 1.25″ MAXIMUM TAP 1-8 UNC LOWER TURRET AND TOOLING SPECIFICATIONS: TYPE OF TURRET DRUM TOOL SHANK HEIGHT 1.0″ X 1.0″ X 5″L TOOL SIZE (BORING BAR MAXIMUM DIAMETER) 1.25″ TOTAL NUMBER OF TOOLS 9 (6 ROTARY OPT.) ROTARY TOOL SPINDLE SPEED 4,500RPM ROTARY TOOL SPINDLE HORSEPOWER (10% ED) 5 H.P. (A.C.) MAXIMUM DRILL 4,500/6,000 RPM 14/12 MM MAXIMUM TAP 4,500/6,000 RPM M12/M10 AXIS TRAVELS: B-AXIS 225 DEGREES (0.0001 DEGREE INCREMENTS) Y-AXIS +/- 4.53″ X-AXIS 24.8″ Z-AXIS 62.41″ X2 AXIS LOWER 9.06″ Z2 AXIS LOWER 60.24″ SECOND HEADSTOCK W-AXIS 60.24″ AXIS RAPID RATES: Y-AXIS 1024 IPM X/X2 AXIS 1496 IPM Z/Z2 AXIS 1496 IPM SECOND HEADSTOCK W-AXIS 1181 IPM C-AXIS 555 RPM GENERAL SPECIFICATIONS: FLOOR SPACE (WXL) 201.2″ X 97.6″ MACHINE HEIGHT 114.6″ TOTAL POWER REQUIRED (MACHINE ONLY) 90.7 KVA NOTE: ACTUAL MACHINE MAIN TRANSFORMER KVA RATING WILL BE GREATER. AIR REQUIREMENTS 72.5 PSI/24.7 CFM MACHINE WEIGHT 29,980 LBS. EQUIPPED WITH: 2) 10″ Hydraulic Chucks on Main and Sub. MAZATROL MATRIX CONTROL 15” COLOR LCD EIA/ISO CODE INPUT FUNCTION 2ND SPINDLE C-AXIS 0.0001 DEGREE INCR 40 KM TOOL MAGAZINE C1C2 SYNCHRONOUS FUNCTION CHIP CONVEYOR SIDE – 1500U (60″) ALL AVAILABLE TOOLING AND MANUALS